Grab Settings¶
Network options¶
url¶
- Type:
string
- Default:
None
The URL of the requested web page. You can use relative URLS, in which case Grab will build the absolute url by joining the relative URL with the URL or previously requested document. Be aware that Grab does not automatically escape unsafe characters in the URL. This is a design feature. You can use urllib.quote and urllib.quote_plus functions to make your URLs safe.
More info about valid URLs is in RFC 2396.
timeout¶
- Type:
int
- Default:
15
Maximum time for a network operation. If it is exceeded, GrabNetworkTimeout is raised.
connect_timeout¶
- Type:
int
- Default:
3
Maximum time for connection to the remote server and receipt of an initial response. If it is exceeded, GrabNetworkTimeout is raised.
follow_refresh¶
- Type:
bool
- Default:
False
Automatically follow the URL specified in <meta http-equiv=”refresh”> tag.
follow_location¶
- Type:
bool
- Default:
True
Automatically follow the location in 301/302 response.
interface¶
- Type:
string
- Default:
None
The network interface through which the request should be submitted.
To specify the interface by its OS name, use “if!***” format, e.g. “if!eth0”. To specify the interface by its name or ip address, use “host!***” format, e.g. “host!127.0.0.1” or “host!localhost”.
See also the pycurl manual: http://curl.haxx.se/libcurl/c/curl_easy_setopt.html#CURLOPTINTERFACE
redirect_limit¶
- Type:
int
- Default:
10
Set the maximum number of redirects that Grab will do for one request. Redirects follow the “Location” header in 301/302 network responses, and also follow the URL specified in meta refresh tags.
userpwd¶
- Type:
string
- Default:
None
The username and the password to send during HTTP authorization. The value of that options is the string of format “username:password”.
HTTP Options¶
user_agent¶
- Type:
string
- Default:
see below
Sets the content of the “User-Agent” HTTP-header. By default, Grab randomly chooses a user agent from the list of real user agents that is built into Grab itself.
user_agent_file¶
- Type:
string
- Default:
None
Path to the text file with User-Agent strings. If this option is specified, then Grab randomly chooses one line from that file.
method¶
- Type:
string
- Default:
“GET”
- Possible values:
“GET”, “POST”, “PUT”, “DELETE”
The HTTP request method to use. By default, GET is used. If you specify post or multipart_post options, then Grab automatically changes the method to POST.
post¶
- Type:
sequence of pairs or dict or string
- Default:
None
Data to be sent with the POST request. Depending on the type of data, the corresponding method of handling that data is selected. The default type for POST requests is “application/x-www-form-urlencoded”.
In case of dict or sequence of pairs, the following algorithm is applied to each value:
objects of grab.upload.UploadFile class are converted into pycurl structures
unicode strings are converted into byte strings
None values are converted into empty strings
If post value is just a string, then it is placed into the network request without any modification.
multipart_post¶
- Type:
sequence of pairs or dict
- Default:
None
Data to be sent with the POST request. This option forces the POST request to be in “multipart/form-data” form.
headers¶
- Type:
dict
- Default:
None
Additional HTTP-headers. The value of this option will be added to headers that Grab generates by default. See details in Work with HTTP Headers.
common_headers¶
- Type:
dict
- Default:
None
By default, Grab generates some common HTTP headers to mimic the behaviour of a real web browser. If you have trouble with these default headers, you can specify your own headers with this option. Please note that the usual way to specify a header is to use the headers option. See details in Work with HTTP Headers.
referer¶
- Type:
string
- Default:
see below
The content of the “Referer” HTTP-header. By default, Grab builds this header with the URL of the previously requested document.
reuse_referer¶
- Type:
bool
- Default:
True
If this option is enabled, then Grab uses the URL of the previously requested document to build the content of the “Referer” HTTP header.
Proxy Options¶
proxy¶
- Type:
string
- Default:
None
The address of the proxy server, in either “domain:port” or “ip:port” format.
proxy_userpwd¶
- Type:
string
- Default:
None
Security data to submit to the proxy if it requires authentication. Form of data is “username:password”
proxy_type¶
- Type:
string
- Default:
None
Type of proxy server. Available values are “http”, “socks4” and “socks5”.
proxy_auto_change¶
- Type:
bool
- Default:
True
If Grab should change the proxy before every network request.
Response Processing Options¶
encoding¶
- Type:
string
- Default:
“gzip”
List of methods that the remote server could use to compress the content of its response. The default value of this option is “gzip”. To disable all compression, pass the empty string to this option.
document_charset¶
- Type:
string
- Default:
None
The character set of the document’s content. By default Grab detects the charset of the document automatically. If it detects the charset incorrectly you can specify exact charset with this option. The charset is used to get unicode representation of the document content and also to build DOM tree.
charset¶
- Type:
string
- Default:
‘utf-8’
To send a request to the network Grab should convert all unicode data into bytes. It uses the charset for encoding. For example:
g.setup(post=b'abc')
no conversion required. But if
g.setup(post='Превед, медвед!')
then the unicode data has to be converted to charset encoding. By default that would be utf-8.
nobody¶
- Type:
bool
- Default:
False
Ignore the body of the network response. When this option is enabled, the connection is abandoned at the moment when remote server transfers all response headers and begins to transfer the body of the response. You can use this option with any HTTP method.
body_maxsize¶
- Type:
int
- Default:
None
A limit on the maximum size of data that should be received from the remote server. If the limit is reached, the connection is abandoned and you can work with the data received so far.
lowercased_tree¶
- type:
bool
- Default:
False
Convert the content of the document to lowercase before passing it to the lxml library to build the DOM tree. This option does not affect the content of response.body, which always stores the original data.
strip_null_bytes¶
- Type:
bool
- Default:
True
Control the removal of null bytes from the body of HTML documents before they a re passed to lxml to build a DOM tree. lxml stops processing HTML documents at the first place where it finds a null byte. To avoid such issues Grab, removes null bytes from the document body by default. This option does not affect the content of response.body that always stores the original data.
body_inmemory¶
- Type:
bool
- Default:
True
Control the way the network response is received. By default, Grab downloads data into memory. To handle large files, you can set body_inmemory=False to download the network response directly to the disk.
body_storage_dir¶
- Type:
bool
- Default:
None
If you use body_inmemory=False, then you have to specify the directory where Grab will save network requests.
body_storage_filename¶
- Type:
string
- Default:
None
If you use body_inmemory=False, you can let Grab automatically choose names for the files where it saves network responses. By default, Grab randomly builds unique names for files. With the body_storage_filename option, you can choose the exact file name to save response to. Note that Grab will save every response to that file, so you need to change the body_storage_filename option before each new request, or set it to None to enable default randomly generated file names.
content_type¶
- Type:
string
- Default:
“html”
- Available values:
“html” and “xml”
This option controls which lxml parser is used to process the body of the response. By default, the html parser is used. If you want to parse XML, then you may need to change this option to “xml” to force the use of an XML parser which does not strip the content of CDATA nodes.
fix_special_entities¶
- Type:
bool
- Default:
True
Fix &#X; entities, where X between 128 and 160. Such entities are parsed by modern browsers as windows-1251 entities, independently of the real charset of the document. If this option is True, then such entities will be replaced with appropriate unicode entities, e.g.: — -> —
Debugging¶
log_file¶
- Type:
string
- Default:
None
Path to the file where the body of the recent network response will be saved. See details at Saving the content of requests and responses.
log_dir¶
- Type:
string
- Default:
None
Directory to save the content of each response in. Each response will be saved to a unique file. See details at Saving the content of requests and responses.
verbose_logging¶
- Type:
bool
- Default:
False
This option enables printing to console of all detailed debug info about each pycurl action. Sometimes this can be useful.
debug_post¶
- Type:
bool
- Default:
False
Enable logging of POST request content.